View V23990-K220-A41-PM_8673530.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

V23990-K220-A41-PM miniskiip? 2 pim 1200 v / 35 a solderless interconnection trench fieldstop igbt4 technology enhanced input rectifier industrial motor drives V23990-K220-A41-PM t j =25c, unless otherwise specified parameter symbol value unit repetitive peak reverse voltage v rrm 1600 v maximum junction temperature t jmax 150 c inverter switch\brake switch t sc t j 150c 10 s v cc v ge =15v 800 v 1200 t j = t jmax 96 t p limited by t jmax t s =80c 45 t s =80c 77 1020 t j =150c t p =10ms 450 20 175 a 38 105 t s =80c collector-emitter break down voltagerepetitive peak collector current dc collector current gate-emitter peak voltage rectifier diode p tot dc forward current features miniskiip? 2 housing target applications schematic a types i2t-value maximum ratings i fav a 2 s i fsm condition t j = t jmax c vv w a maximum junction temperature power dissipation v ge t jmax p tot short circuit ratings t j = t jmax t j = t jmax t s =80c v ce i crm i c a w surge forward currentpower dissipation i 2 t 26 feb. 2016 / revision 4 copyright vincotech 1
V23990-K220-A41-PM t j =25c, unless otherwise specified parameter symbol value unit maximum ratings condition inverter diode\brake diodethermal properties insulation properties v is t=2s dc voltage 4000 v min 12.7 mm min 12.7 mm 175 t jmax i f t s =80c 1200 p tot t s =80c t j = t jmax 62 v rrm v w c power dissipationmaximum junction temperature repetitive peak forward current peak repetitive reverse voltagedc forward current a t p =10ms half sine a 25 225 t j = t jmax i frm -40+( t jmax - 25) c storage temperature t stg -40+125 c clearance insulation voltagecreepage distance t op operation temperature under switching condition 26 feb. 2016 / revision 4 copyright vincotech 2
V23990-K220-A41-PM parameter symbol unit v ge [v] or v gs [v] v r [v] or v ce [v] or v ds [v] i c [a] or i f [a] or i d [a] t j [c] min typ max 25 0,8 1,2 1,35 125 1,12 25 0,85 125 0,73 25 14 125 15 25 0,1 125 1,1 thermal resistance chip to heatsink per chip r th(j-s) 0,90 25 5 5,8 6,5 150 25 1,6 1,87 2,15 150 2,3 25 0,05 15025 300 150 25 78 150 79 25 24 150 29 25 196 150 268 25 77 150 131 25 2,54 150 3,84 25 1,92 150 3,18 thermal resistance chip to heatsink per chip r th(j-s) 1,07 25 1,5 2,36 2,65 150 2,34 25 16 150 22,6 25 336 150 550 25 2,2 150 5,36 25 63 150 67 25 0,77 150 2,07 thermal resistance chip to heatsink per chip r th(j-s) 1,52 e vincotech ntc reference 1,731*10-5 1/k2 7,635*10-3 1/k b-value b (25/100) tol. % t=25 t=25 a-value b (25/50) tol. % thermal grease thickness50m =1w/mk thermal grease thickness50m =1w/mk k/w a 15 v ns 35 - vv nc ? -3 % t=25 1670,3125 3 v ce = v ge f=1mhz r goff =16? 15 00 15 vcc=960v t r t d(off) q g q rr t rr e rec ( d i rf /d t ) max reverse transfer capacitance i ges v ge(th) v cesat i ces c oss r gint t f e on c ies e off i rrm t d(on) c rss v f input capacitanceoutput capacitance turn-off energy loss per pulse collector-emitter saturation voltageturn-on energy loss per pulse collector-emitter cut-off current incl. diode value conditions characteristic values forward voltagethreshold voltage (for power loss calc. only) slope resistance (for power loss calc. only) v f v to r t rectifier diode 25 k/w vv m? ma reverse current i r 115 a/s r gon =16? 20 15 35 35 600 diode forward voltage gate chargereverse recovery time reverse recovered energy peak rate of fall of recovery current reverse recovered charge inverter diode\brake diode peak reverse recovery current fall time turn-off delay time turn-on delay time rise time gate-emitter leakage currentintegrated gate resistor inverter switch\brake switch gate emitter threshold voltage 35 0,001240 600 25 0 1200 mw/k t=25 t=100 1000 r100 p ? t=100 rated resistance r power dissipation constant deviation of r100 r/r r 100 =1670 ? 1600 thermal grease thickness50m =1w/mk thermistor r gon =16? 25 25 k/w c mws ? pf mws 1950 155192 ma ns na copyright vincotech 3 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 1 inverter switch\brake switch figure 2 inverter switch\brake switch typical output characteristics i c = f( v ce ) i c = f( v ce ) at at t p = 250 s t p = 250 s t j = 25 c t j = 150 c v ge from 7 v to 17 v in steps of 1 v v ge from 7 v to 17 v in steps of 1 v figure 3 inverter switch\brake switch figure 4 inverter diode\brake diode typical transfer characteristics typical diode forward current as i c = f( v ge ) a function of forward voltage i f = f( v f ) at at t p = 250 s t p = 250 s v ce = 10 v inverter\brake characteristics typical output characteristics 0 20 40 60 80 100 0 1 2 3 4 5 v ce (v) i c (a) 0 5 10 15 20 25 30 35 0 2 4 6 8 10 12 v ge (v) i c (a) t j = 25c t j = t jmax -25c 0 20 40 60 80 100 0 1 2 3 4 5 v f (v) i f (a) t j = 25c t j = t jmax -25c 0 20 40 60 80 100 0 1 2 3 4 5 v ce (v) i c (a) copyright vincotech 4 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 5 inverter switch\brake switch figure 6 inverter switch\brake switch typical switching energy losses typical switching energy losses as a function of collector current as a function of gate resistor e = f( i c ) e = f( r g ) with an inductive load at with an inductive load at t j = 25/150 c t j = 25/150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 16 ? i c = 35 a r goff = 16 ? figure 7 inverter switch\brake switch figure 8 inverter switch\brake switch typical reverse recovery energy loss typical reverse recovery energy loss as a function of collector current as a function of gate resistor e rec = f( i c ) e rec = f( r g ) with an inductive load at with an inductive load at t j = 25/150 c t j = 25/150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 16 ? i c = 35 a inverter\brake characteristics e on high t e off high t e on low t e off low t 0 2 4 6 8 10 0 15 30 45 60 75 i c (a) e (mws) e off high t e on high t e on low t e off low t 0 2 4 6 8 10 0 15 30 45 60 75 r g ( w ) e (mws) t j = t jmax -25c e rec t j = 25c e rec 0 0,5 1 1,5 2 2,5 3 0 15 30 45 60 75 i c (a) e (mws) t j = t jmax -25c e rec t j = 25c e rec 0 0,5 1 1,5 2 2,5 3 0 15 30 45 60 75 r g ( w ) e (mws) copyright vincotech 5 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 9 inverter switch\brake switch figure 10 inverter switch\brake switch typical switching times as a typical switching times as a function of collector current function of gate resistor t = f( i c ) t = f( r g ) with an inductive load at with an inductive load at t j = 150 c t j = 150 c v ce = 600 v v ce = 600 v v ge = 15 v v ge = 15 v r gon = 16 ? i c = 35 a r goff = 16 ? figure 11 inverter diode\brake diode figure 12 inverter diode\brake diode typical reverse recovery time as a typical reverse recovery time as a function of collector current function of igbt turn on gate resistor t rr = f( i c ) t rr = f( r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 35 a r gon = 16 ? v ge = 15 v inverter\brake characteristics t doff t f t don t r 0,001 0,01 0,1 1 0 15 30 45 60 75 i c (a) t ( m s) t j = t jmax -25c t rr t j = 25c t rr 0 0,2 0,4 0,6 0,8 1 0 15 30 45 60 75 r g on ( w ww w ) t rr ( m s) t doff t f t don t r 0,001 0,01 0,1 1 0 15 30 45 60 75 r g ( w ww w ) t ( m s) t j = t jmax -25c t rr t rr t j = 25c 0 0,2 0,4 0,6 0,8 1 0 15 30 45 60 75 i c (a) t rr ( m s) copyright vincotech 6 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 13 inverter diode\brake diode figure 14 inverter diode\brake diode typical reverse recovery charge as a typical reverse recovery charge as a function of collector current function of igbt turn on gate resistor q rr = f( i c ) q rr = f( r gon ) atat at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 35 a r gon = 16 ? v ge = 15 v figure 15 inverter diode\brake diode figure 16 inverter diode\brake diode typical reverse recovery current as a typical reverse recovery current as a function of collector current function of igbt turn on gate resistor i rrm = f( i c ) i rrm = f( r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 35 a r gon = 16 ? v ge = 15 v inverter\brake characteristics t j = t jmax - 25c i rrm t j = 25c 0 20 40 60 80 0 15 30 45 60 75 r gon ( w ww w ) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 2 4 6 8 0 15 30 45 60 75 r g on ( w ) q rr ( m c) t j = t jmax -25c i rrm t j = 25c i rrm 0 5 10 15 20 25 30 0 15 30 45 60 75 i c (a) i rrm (a) t j = t jmax -25c q rr t j = 25c q rr 0 2 4 6 8 0 15 30 45 60 75 i c (a) q rr ( m c) copyright vincotech 7 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 17 inverter diode\brake diode figure 18 inverter diode\brake diode typical rate of fall of forward typical rate of fall of forward and reverse recovery current as a and reverse recovery current as a function of collector current function of igbt turn on gate resistor d i 0 /d t ,d i rec /d t = f( i c ) d i 0 /d t ,d i rec /d t = f( r gon ) at at t j = 25/150 c t j = 25/150 c v ce = 600 v v r = 600 v v ge = 15 v i f = 35 a r gon = 16 ? v ge = 15 v figure 19 inverter switch\brake switch figure 20 inverter diode\brake diode igbt transient thermal impedance fwd transient thermal impedance as a function of pulse width as a function of pulse width z thjh = f( t p ) z thjh = f( t p ) at at d = t p / t d = t p / t r thjh = 0,99 k/w r thjh = 1,23 k/w igbt thermal model values fwd thermal model values r (k/w) tau (s) r (k/w) tau (s) 0,10 1,5e+00 0,08 2,1e+00 0,31 2,7e-01 0,33 2,4e-01 0,41 8,9e-02 0,50 6,6e-02 0,13 1,4e-02 0,22 1,3e-02 0,03 2,8e-03 0,10 2,3e-03 inverter\brake characteristics t p (s) z thjh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t p (s) z th-jh (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 t j = t jmax - 25c di 0 /dt di rec /dt high t di rec /dt t j = 25c 0 1000 2000 3000 4000 5000 6000 0 15 30 45 60 75 r gon ( w ww w ) di rec / dt (a/ m s) di 0 /dt high t di rec /dt high t di rec /dt low t di o /dt low t 0 300 600 900 1200 1500 0 15 30 45 60 75 i c (a) di rec / dt (a/ m m m m s) di rec /dt di 0 /dt copyright vincotech 8 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 21 inverter switch\brake switch figure 22 inverter switch\brake switch power dissipation as a collector current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i c = f( t h ) at at t j = 175 c t j = 175 c v ge = 15 v figure 23 inverter diode\brake diode fwd figure 24 inverter diode\brake diode fwd power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i f = f( t h ) at at t j = 175 c t j = 175 c inverter\brake characteristics 0 30 60 90 120 150 180 0 50 100 150 200 t h ( o c) p tot (w) 0 10 20 30 40 50 0 50 100 150 200 t h ( o c) i c (a) 0 30 60 90 120 150 0 50 100 150 200 t h ( o c) p tot (w) 0 10 20 30 40 0 50 100 150 200 t h ( o c) i f (a) copyright vincotech 9 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 25 inverter switch\brake switch figure 26 inverter switch\brake switch safe operating area as a function gate voltage vs gate charge of collector-emitter voltage i c = f( v ce ) v ge = f( q ge ) at at d = single pulse i c = 35 a t h = 80 oc v ge = 15 v t j = t jmax oc inverter\brake characteristics v ce (v) i c (a) 10 3 10 0 10 -1 10 1 10 2 10 1 10 2 100us 1ms 10ms 100ms dc 10 0 10 3 10us 0 2 4 6 8 10 12 14 16 0 20 40 60 80 100 120 140 160 180 200 q g (nc) v ge (v) 240v 960v copyright vincotech 10 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 1 rectifier diode diode figure 2 rectifier diode diode typical diode forward current as diode transient thermal impedance a function of forward voltage as a function of pulse width i f = f( v f ) z thjh = f( t p ) at at t p = 250 s d = t p / t r thjh = 0,905 k/w figure 3 rectifier diode diode figure 4 rectifier diode diode power dissipation as a forward current as a function of heatsink temperature function of heatsink temperature p tot = f( t h ) i f = f( t h ) at at t j = 150 oc t j = 150 oc rectifier diode 0 15 30 45 60 75 0 0,4 0,8 1,2 1,6 2 v f (v) i f (a) t j = 25c t j = t jmax -25c t p (s) z thjc (k/w) 10 1 10 0 10 -1 10 -2 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 10 -5 d = 0,5 0,2 0,1 0,05 0,02 0,01 0,005 0.000 0 40 80 120 160 200 0 30 60 90 120 150 t h ( o c) p tot (w) 0 10 20 30 40 50 0 30 60 90 120 150 t h ( o c) i f (a) copyright vincotech 11 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 1 thermistor typical ptc characteristicas a function of temperature r t = f( t ) thermistor ptc-typical temperature characteristic 1000 1200 1400 1600 1800 2000 25 50 75 100 125 t (c) r/ ? copyright vincotech 12 26 feb. 2016 / revision 4
V23990-K220-A41-PM t j 150 c r gon 16 ? r goff 16 ? figure 1 igbt figure 2 igbt turn-off switching waveforms & definition of t doff , t eoff turn-on switching waveforms & definition of t don , t eon ( t e off = integrating time for e off ) ( t e on = integrating time for e on ) v ge (0%) = -15 v v ge (0%) = -15 v v ge (100%) = 15 v v ge (100%) = 15 v v c (100%) = 600 v v c (100%) = 600 v i c (100%) = 35 a i c (100%) = 35 a t doff = 0,27 s t don = 0,08 s t e off = 0,60 s t e on = 0,39 s figure 3 igbt figure 4 igbt turn-off switching waveforms & definition of t f turn-on switching waveforms & definition of t r v c (100%) = 600 v v c (100%) = 600 v i c (100%) = 35 a i c (100%) = 35 a t f = 0,13 s t r = 0,03 s switching definitions inverter general conditions == = i c 1% v ce 90% v ge 90% -30 -10 10 30 50 70 90 110 130 -0,2 -0,05 0,1 0,25 0,4 0,55 0,7 0,85 time (us) % t doff t eoff v ce i c v ge i c10% v ge10% t don v ce 3% -30 0 30 60 90 120 150 180 2,7 2,8 2,9 3 3,1 3,2 3,3 3,4 time(us) % i c v ce t eon v ge fitted i c10% i c 90% i c 60% i c 40% -20 0 20 40 60 80 100 120 140 0,15 0,2 0,25 0,3 0,35 0,4 0,45 0,5 time (us) % v ce i c t f i c10% i c 90% -30 0 30 60 90 120 150 180 2,9 3 3,1 3,2 3,3 time(us) % tr v ce ic copyright vincotech 13 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 5 igbt figure 6 igbt turn-off switching waveforms & definition of t eoff turn-on switching waveforms & definition of t eon p off (100%) = 20,88 kw p on (100%) = 20,88 kw e off (100%) = 3,18 mj e on (100%) = 3,84 mj t e off = 0,60 s t e on = 0,39 s figure 7 fwd turn-off switching waveforms & definition of t rr v d (100%) = 600 v i d (100%) = 35 a i rrm (100%) = 23 a t rr = 0,57 s switching definitions inverter i c 1% v ge 90% -20 0 20 40 60 80 100 120 -0,2 0 0,2 0,4 0,6 0,8 time (us) % p off e off t eoff v ce 3% v ge 10% -20 20 60 100 140 180 2,6 2,75 2,9 3,05 3,2 3,35 3,5 time(us) % p on e on t eon i rrm 10% i rrm 90% i rrm 100% trr -120 -80 -40 0 40 80 120 2,6 2,8 3 3,2 3,4 3,6 3,8 time(us) % i d v d fitted copyright vincotech 14 26 feb. 2016 / revision 4
V23990-K220-A41-PM figure 8 fwd figure 9 fwd turn-on switching waveforms & definition of t qrr turn-on switching waveforms & definition of t erec ( t q rr = integrating time for q rr ) ( t erec = integrating time for e rec ) i d (100%) = 35 a p rec (100%) = 20,88 kw q rr (100%) = 5,40 c e rec (100%) = 2,10 mj t q rr = 0,80 s t e rec = 0,80 s switching definitions inverter t qrr -100 -50 0 50 100 150 2,6 2,8 3 3,2 3,4 3,6 3,8 4 % i d q rr time(us) -20 0 20 40 60 80 100 120 2,6 2,8 3 3,2 3,4 3,6 3,8 4 time(us) % p rec e rec te rec copyright vincotech 15 26 feb. 2016 / revision 4
V23990-K220-A41-PM vinco date code name&ver ul lot serial vinco wwyy nnnnnnnvv ul lllll ssss type&ver lot number serial date code tttttttvv lllll ssss wwyy version with std lid (black v23990-k12-t-pm)with std lid (black v23990-k12-t-pm) and p12 with thin lid (white v23990-k13-t-pm) ordering code v23990-k220-a41-/0a/-pmv23990-k220-a41-/1a/-pm v23990-k220-a41-/0b/-pm outline text datamatrix pinout identification ordering code and marking - outline - pinout ordering code & marking id component voltage current d8,d9,d10,d11,d12,d13 function comment t1,t2,t3,t4,t5,t6 d1,d2,d3,d4,d5,d6 1200 v1200 v inverter switch inverter diode t igbt fwd igbt fwd rectifier ptc t7 d7 1200 v1200 v 1600 v rectifier diode 35 a35 a 35 a 35 a 25 a thermistor brake switch brake diode v23990-k220-a41-/1b/-pm with thin lid (white v23990-k13-t-pm) and p12 copyright vincotech 16 26 feb. 2016 / revision 4
V23990-K220-A41-PM 72 disclaimerlife support policy as used herein: document no.: date: modification: pages package data package data for miniskiip ? 2 packages see vincotech.com website. v23990-k220-a41-d4-14 26 feb. 2016 new brand, disclaimer all sample 2. a critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. the information, specifications, procedures, methods and recommendations herein (together information) are presented by vincotech to reader in good faith, are believed to be accurate and reliable, but may well be incomplete and/or not applicable to all conditions or situations that may exist or occur. vincotech reserves the right to make any changes without further notice to any products to improve reliability, function or design. no representation, guarantee or warranty is made to reader as to the accuracy, reliability or completeness of said information or that the application or use of any of the same will avoid hazards, accidents, losses, damages or injury of any kind to persons or property or that the same will not infringe third parties rights or give desired results. it is readers sole responsibility to test and determine the suitability of the information and the product for readers intended use.vincotech products are not authorised for use as critical components in life support devices or systems without the express written approval of vincotech. 1. life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordance with instructions for use provided in labelling can be reasonably expected to result in significant injury to the user. handling instruction handling instructions for miniskiip ? 2 packages see vincotech.com website. packaging instruction standard packaging quantity (spq) >spq standard

▲Up To Search▲

Price & Availability of V23990-K220-A41-PM

	To Download V23990-K220-A41-PM Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .